Front Panel Leds; Rear Panel - LevelOne PLI-2030 HomePlug User Manual

Front Panel LEDs

Power On - Normal operation.
Off - No power
HomePlug On - The Powerline network is active. This means that at least one other HomePlug device
Off - Powerline network is not available - no other HomePlug devices were detected.
Flashing - Data is being transmitted or received via the Powerline network.
* The initial HomePlug device connects to the Powerline is called CO (Coordinator) CO's
LED will illuminate under all circumstance.
Ethernet On - Ethernet connection is active.
Off - No Ethernet connection.
Flashing - Data is being transmitted or received via the Ethernet Port.
This button is designed to generate an individual network group under multiple nods (PLI-
Security
2030) environment.
Please refer to Security Button section for more details.
This button is used to clear ALL data and restore ALL settings to the factory default values.
Reset
Press and release the reset button to begin restore factory default.

Rear Panel

The rear panel contains only the AC plug and a sticker containing the 200Mbps HomePlug AV Ethernet Bridge's
Password. (Each HomePlug device contains a unique Password.)
was detected.