Connection Log
Connection Log
Buttons
Connect
Disconnect
Clear Log
Refresh
Connection Status - L2TP
If using L2TP, a screen like the following example will be displayed when the "Connec-
tion Details" button is clicked.
The Connection Log shows status messages relating to the
existing connection.
The "Clear Log" button will restart the Log, while the Re-
fresh button will update the messages shown on screen.
If not connected, establish a connection to your ISP.
If connected to your ISP, terminate the connection.
Delete all data currently in the Log. This will make it easier to
read new messages.
Update the data on screen.
Figure 30: L2TP Status Screen
50
Operation and Status