To Delete The Batch Transmission Setting; Specifying The Setting For "Mailbox - Konica Minolta FX-3 User Manual

6

To delete the batch transmission setting

1
Select the "FAX REGISTRATION".
H Refer to "Selecting the "FAX REGISTRATION" menu" on
page 6-2.
2
Press the [5] key from the 10-Key
Pad to select "BATCH TX".
3
Press the one-touch dial key
programmed with the batch
transmission setting that you wish to
delete.
4
Press the [No] key.
A confirmation message appears,
asking whether or not to delete the
batch transmission setting.
5
Press the [Yes] key.
The "SELECT REGIST.KEY"
screen appears again.

Specifying the Setting for "MAILBOX"

Mailbox IDs must first be specified in order to receive faxes with mailbox
reception only if the mailbox ID sent by the caller matches the mailbox ID
set on this machine.
Note
A mailbox ID cannot be the same as a relay box ID.
6-30
Using the Utility Mode (Fax)
Fax Kit (FX-3)