Settings Up The Communication - Konica Minolta FX-3 User Manual

6
6.4

Settings Up the Communication

From the "COMM.SETTING" menu, various functions are available for
specifying communication settings.
No. COMM.SETTING
1 TONE/PULSE
2 LINE MONITOR
3 PSTN/PBX
* By installing the optional Network Interface Card, settings can also be specified from the
network tool PageScope Light. (p. 6-62)
6-50
Characteristic/Description
This function can be used to specify the dialing system. If this
function is not correctly set to the type of dialing system used,
faxes cannot be sent. Select the correct setting after checking
which type of dialing system is used by your telephone line.
This function can be used to set the volume when monitoring
communication to "HIGH", "LOW" or "OFF".
• The manufacturer's default setting is "LOW".
This function can be used to set whether the connected
telephone wiring is a public switched telephone network
(PSTN) or a private branch exchange (PBX).
For a PBX system, the outside line access number (or
extension number) must be specified.
Using the Utility Mode (Fax)
Fax Kit (FX-3)