Panasonic KX-NS1000 Operating Manual page 311

Item
Automatic Delivery Status
Default Fax Number [0-9 * #
T , ; ]
Automatic Delivery Status
Printed Fax Message
Play Voice/Fax Selection
Menu
Fax Number Confirmation
No Space for Receiving
Coverage Mode
Cover Page Language
Announce Number of Messages
Item
Subscriber Service - All New
Messages
Subscriber Service - All
Messages
Subscriber Service - New
Voice Messages
Subscriber Service - New
Fax Messages
Specifies the default number for which to send automatically delivered
faxes.
Enter a maximum of 32 digits consisting of 0–9,
•
,: Dial Pause (default 1 s)
•
;: Dial Pause (default 3 s)
•
T: Dial Tone Detection
•
X: Callback Number Entry Code
•
0–9, , #: Dial Code
Note
To clear the default fax number, deleted the number from this box.
Specifies if automatically forwarded faxes are marked as "old" or "new",
or deleted.
Specifies if you will be prompted to choose which messages will be
played: either voice messages, information about waiting fax messages,
or all messages.
Specifies if a dialled fax number must be re-entered for confirmation
before sending.
Specifies the action taken when there is not enough free space in the
mailbox to save a fax message in the mailbox:
•
Transfer to Fax Extension: Transfers the fax to a specified fax
extension.
•
Receive in GDM: The fax is redirected to the general delivery
mailbox.
•
No Receiving: The fax message is not received and the system
goes on hook.
Note
If no fax extension is specified but Transfer to Fax Extension is
selected, the system will go on hook.
Specifies the language used for the set information generated for fax
cover pages.
Specifies if the system announces to you the number of only new
messages in your mailbox when you log in.
Specifies if the system announces to you the number of all messages in
your mailbox when you log in.
Specifies if the system announces to you the number of only new voice
messages in your mailbox when you log in.
Specifies if the system announces to you the number of only new fax
messages in your mailbox when you log in.
3.2.1 User Programming
Description
, # and special codes:
Description
Operating Manual 311