Panasonic KX-NS1000 Operating Manual page 8

Feature Highlights
To set/cancel Call Forwarding
PT/SLT/PS/SIP Extn./S-PS
Off-hook.
destination
extension no.
outside line
access no.
(max. 32 digits)
Enter destination extension number.
Or enter outside line access number
and then outside phone number.
For non-KX-UT series SIP phone users
a.
The following features are available for SIP phone users:
–
Making calls
–
Answering calls
–
Holding calls
–
Transferring calls (You cannot go on-hook before the transferred party answers.)
b.
The available operations using feature numbers are limited. Refer to the telephone types displayed at
the top left of each operation.
c.
The tones listed in "5.4.1 What is This Tone?" are not available for SIP phone users. Tones or the tone
types may vary depending on the type of telephone being used. For example, when you put a call on
hold, a specific tone for the SIP phone may be heard, or no tone may be heard.
d.
Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to activate
Automatic Callback Busy, will be ignored.
e.
The operations for SIP phones may differ from the steps in this manual, and may vary depending on
the type of telephone being used.
f.
To execute an operation, some SIP phones may require that the OK button is pressed after pressing all
the buttons of the operation.
Notes for KX-WT115 PS Users
The operation and display of the KX-WT115 may differ from KX-TCA series PSs. For example, when the
KX-WT115 is not answered while using it in parallel with a wired telephone, the display of incoming call log
is different from that of the display of KX-TCA series PSs.
8 Operating Manual
Both Calls
0
OR
7 1 Outside Calls
1
OR
Intercom Calls
2
Enter 71. Enter 0 to 2 as
you desire.
OR
outside
phone no.
Enter #.
Cancel
0
All Calls
2
Busy
3
No Answer
4
Busy/No Answer
5
Enter required
number.
For "Cancel", go on-hook
directly after entering 0.
C.Tone
On-hook.
After entering 0 for "Cancel",
for KX-UT series:
Press ENTER.
OR
for S-PS:
Press CALL.
Go on-hook
For KX-UT series:
Press ENTER.
OR
For S-PS:
Press CALL.
For KX-UT series:
max. 26 digits