5.4.1 What is This Tone?
When setting the features or programming
Confirmation Tones
Tone 1
•
The feature setting was set
successfully.
•
A call is received in Voice-calling
mode.
Tone 2
•
Before receiving a page through
an external speaker
•
You receive a call in Hands-free
mode.
•
You established a call with a
KX-UT series SIP phone that has
Hands-free Answerback
enabled.
Tone 3
•
Before the following features
activate:
–
Retrieving a held call
–
Picking up another call
–
Paging/Answering a paging
announcement
–
Answering the call through a
speaker
•
You establish a call with an
extension in the following cases:
–
The called extension has
hands-free Answerback
enabled and is not a KX-UT
series SIP phone.
–
Voice-calling mode
•
When making a call to or from a
doorphone.
Tone 4
Establishing or leaving a
conference
Tone 5
A call has been put on hold.
360
Operating Manual
1 s
1 s
1 s
1 s
1 s