Panasonic KX-NS1000 Operating Manual page 22

1.1.5 Before Operating the Telephones
Registration for your Portable Station (PS)/SIP Phone/SIP-CS compatible Portable
Station (S-PS)
Your PS, SIP phone, or S-PS must be registered with the PBX and assigned an extension number before
initial use, through system programming. To confirm the extension number of your PS, refer to "Your
extension information" in "3.1.2 Settings on the Programming Mode". For SIP phone and S-PS users, follow
the instructions for your phone.
Feature Numbers
To use certain features, you need to enter specified feature numbers (and an additional parameter, if
required).
There are two types of feature numbers as follows:
•
Flexible feature number
•
Fixed feature number
Fixed feature numbers cannot be changed. However, you can change the flexible numbers to other
numbers for easier use. In this manual, the default numbers (factory installed) are used for operations.
A flexible number is shown as
changed the feature number. Write the new number in "5.3.1 Feature Number Table" (Appendix).
Notice
The default value of a flexible feature number may vary depending on country/area.
Tone
You will hear various tones, during or after an operation, for confirmation. Refer to "5.4.1 What is This
Tone?" (Appendix).
Display
In this manual, "the display ..." refers to the display of a Panasonic telephone. If your telephone is not a
Panasonic display telephone, the message will not be displayed. If you use a Panasonic display telephone,
the display helps you confirm the settings. Some telephones also give you easy access to features.
Messages are displayed according to the feature used. By pressing the corresponding button on the side or
at the bottom of the display, or by pressing the Navigator Key, you can access various features.
Furthermore, depending on the display telephone used, you can operate features or make calls using the
displayed message. Refer to "1.14 Using a Telephone with a Display".
Notice
In this manual, the display messages are described in English.
22 Operating Manual
(half-shaded key). Use the new programmed number if you have
If you use a single line telephone which does not have the " " or "#" keys;
it is not possible to access features that have " " or "#" in their feature numbers.
•
If you use a Panasonic proprietary
telephone which does not have feature
buttons, you may change one of the
unused flexible buttons to a feature
button. Refer to "3.1.3 Customising the
Buttons".