Panasonic KX-NS1000 Operating Manual page 119

•
* If you do not enter an entry code when making the conference group call, extensions/
outside telephones can join the conversation without needing to enter an entry code.
•
Entry codes can consist of the digits "0" through "9". When " " is used as an entry code, no
one can join a conversation that is already in progress. " " must be used by itself (i.e., you
may not combine it with numeric digits).
•
When you are using an outside telephone (through DISA or TIE Line), it is possible to join
the conversation after accessing your extension using Walking COS.
•
Extensions/outside telephones can join the conversation using this feature only when the
conference group call has already been established between the extension originating a
conversation and at least one member.
•
To join a conversation that is already in progress, extensions/outside telephones must be
using an idle extension with no held calls.
•
If a conversation has reached the maximum number of participants, this feature cannot be
used to join the conversation.
•
Starting a Conference Group Call using Hands-free Answerback
If the Hands-free Answerback feature is enabled with at least one conference group
member, the call can be automatically answered and the conversation begins with only one
participant (the caller). Then, up to 6 participants can use the Join After Time Out feature to
join the conversation.
1.7.3 Making a Conference Group Call
Operating Manual 119