Setting The Parallelled Telephone To Ring (Parallelled Telephone) - Panasonic KX-NS1000 Operating Manual

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

PT
While on-hook
(Time Service
(Day/Night/
Lunch/Break))
Press TRANSFER or Time Service
(Day/Night/Lunch/Break).
The Time Service (Day/Night/Lunch/Break) button light shows the current status as follows:
Off: Day mode
Green on: Lunch mode
Flashing green: Break mode
Red on: Night mode
Flashing red: Holiday mode
Any extension user except the managers can check the current status by pressing the Time
Service (Day/Night/Lunch/Break) button.
Customising Your Phone
3.1.3 Customising the Buttons
Create or edit a Time Service (Day/Night/Lunch/Break) button.
1.9.11 Setting the Parallelled Telephone to Ring (Parallelled
Telephone)
In the case where a single line telephone is connected in parallel to your digital
proprietary telephone, you can choose whether the parallelled single line telephone
will ring to an incoming call or not.
(Default: Ring)
DPT
Off-hook.
Even if "No ring" is selected, calls can be made and answered on the single line
telephone by lifting the handset.
If you go off-hook while your parallelled telephone is in use, the call will switch over to
you.

1.9.11 Setting the Parallelled Telephone to Ring (Parallelled Telephone)

OR
3
9
Enter
39.
1
Ring
OR
C.Tone
0
No ring
Enter 1 to ring
or 0 not to ring.
On-hook.
Operating Manual
189

Advertisement

Table of Contents
loading

Table of Contents