Step 5. Turn On The Agilent 86120B - Agilent Technologies Agilent 86120B User Manual

C A U T I O N
1 Press the front-panel LINE key. After approximately 20 seconds, the display
2 If the Agilent 86120B fails to turn on properly, consider the following
Getting Started

Step 5. Turn on the Agilent 86120B

Step 5. Turn on the Agilent 86120B
The front panel LINE switch disconnects the mains circuits from the mains
supply after the EMC filters and before other parts of the instrument.
should look similar to the following figure:
The front-panel LINE switch disconnects the mains circuits from the mains sup-
ply after the EMC filters and before other parts of the instrument.
possibilities:
• Is the line fuse good?
• Does the line socket have power?
• Is it plugged into the proper ac power source?
If the instrument still fails, return it to Agilent Technologies for repair.
"Returning the Instrument for Service" on page
1-8
1-23.
Refer to