Fetch Measurement Instruction - Agilent Technologies Agilent 86120B User Manual

Description
• longer wavelength
• higher frequency
• higher wave number
Syntax
Attribute
Summary
Description
Moves the marker from the current marker position to the next laser line hav-
ing the following characteristic:
If the display is in the List by Ampl mode, it will be changed to List by WL before
the marker is moved.
[WINDow]:GRAPhics:STATe
Turns on and off the display of the power bars.
:DISPlay[:WINDow]:GRAPhics:STATe{?| {ON | OFF | 1 | 0}}
Preset State: on
*RST State: on
SCPI Compliance: standard
Specifying on displays the power bars in all modes except the drift and signal-
to-noise modes. Specifying off prevents the display of power bars for all instru-
ment modes.

FETCh Measurement Instruction

For information on the FETCh measurement instruction,
ment Instructions" on page 5-15.
Programming Commands
FETCh Measurement Instruction
refer to "Measure-
5-67