Displaying Wavelength And Power - Agilent Technologies Agilent 86120B User Manual

Displaying Wavelength and Power

This section gives you step-by-step instructions for measuring peak wave-
length, average wavelength, peak power, and total input power. There are
three display modes:
• Peak wavelength
• List-by-wavelength or power
• Average wavelength and total power
If the measured amplitudes are low, clean the front-panel OPTICAL INPUT con-
nector.
This section includes:
Peak WL mode 2-4
List by WL or power modes 2-6
Total power and average wavelength 2-7
Measuring lasers between 700 nm and 1200 nm 2-8
Limiting the wavelength range 2-9
Measuring broadband devices and chirped lasers 2-10
Graphical display of optical power spectrum 2-11
Instrument states 2-12
Power bar 2-12
Using the Multi-Wavelength Meter
Displaying Wavelength and Power
2-3