Error Messages - Agilent Technologies Agilent 86120B User Manual

Error Messages

In this section, you'll find all the error messages that the Agilent 86120B can
display on its screen.
Table 8-3 on page 8-12
Table 8-2. Instrument Specific Error Messages (1 of 3)
Error Number Error Message
1 BAD CHECKSUM FROM MOTOR
2 MOTOR COMMUNICATION PROBLEM
3 MOTOR NOT MOVING
4 MOTOR INDEX PULSE NOT FOUND
5 MOTOR CHIP SET INIT FAILED
6 MOTOR COMMUTATION FAILURE
7 MOTOR NOT SETTLED
8 MOTOR DID NOT STOP
9 MOTOR MOTION ERROR
10 MOTOR POSITION LIMIT FAILED
11 MOTOR POSITION WRAP FAILED
12 POWER LEVEL TOO HIGH
13 DATA DOWNLOAD PROBLEM
14 DATA ACQUISITION PROBLEM
15 MAX NUMBER OF SIGNALS FOUND
16 MOTOR INTERRUPT RECEIVED
Table 8-2 on page 8-9
lists general SCPI errors.
lists all instrument-specific errors.
Reference
Error Messages
8-9