Table of Contents
Advertisement
Input skip settings
For all inputs, this function sets whether to skip those
inputs when <INPUT> is pressed.
[Input skip settings] - submenu screen
Input skip settings
HDMI1
HDMI2
HDMI3
USB-C
SLOT
PC
PC[YP
P
]
B
R
Screen Transfer
USB/Internal Memory
MEMORY VIEWER
WHITEBOARD
[Off]:
Pressing <INPUT> switches to the
corresponding input, and the input is selected.
[On]:
Pressing <INPUT> skips the corresponding
input (not selectable).
Power management settings
Set each item to reduce power consumption.
This function works only for the input terminal that is
currently selected.
[Power management settings] - submenu screen
Power management settings
Power management mode
No signal power off
HDMI1 power management
HDMI2 power management
HDMI3 power management
USB-C power management
SLOT power management
PC power management
Power save
Extended standby mode
Input detection
Changing delay
1. Setting [Power management mode]
Note
●
Set the "Power management" function to [On] for
terminals to operate this function.
●
When this function is set to [On], [Sensor settings] -
[Ambient light sensor] is disabled (fixed to [Off]).
●
When [Input search] is [All inputs] or [Custom], the
[Input search] function is prioritised. (The "Power
management" function does not operate for each
terminal.) (For details of [Input search] function, see
page 60.)
●
When [Failover/Failback] - [Input change mode] is
set to items other than [Off], the [Failover/Failback]
function is prioritised. (The "Power management"
function does not operate for each terminal.) (For
details of [Failover/Failback] function, see page 61.)
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Custom
Disable
Off
Off
Off
Off
Off
Off
Off
Mode 1
Off
1-1 [Power management mode]: [On]
The following fixed values are set to the menu of
power consumption reduction. Individual setting is
not available.
[No signal power off]: [Enable]
[HDMI1 power management]: [On]
[HDMI2 power management]: [On]
[HDMI3 power management]: [On]
[USB-C power management]: [On]
[SLOT power management]: [On]
[PC power management]: [On]
[Power save]: [On]
1-2 [Power management mode]: [Custom]
The menu of the power consumption reduction
is individually set. This setting is enabled when
[Power management mode] is set to [Custom].
1-3 [Power management mode]: [Input
detection]
Sets the power consumption reduction menu
individually.
This is enabled when [Power management mode]
is set to [Input detection]. This mode interlocks
between the power management operation and the
input detection function for operation. When this
mode detects the change from without-signal state
to with-signal state by monitoring input signals,
the input signal detection function operates, and
an input is automatically switched to the input.
Also, if the current input signal disappears, it is
automatically switched to another input. If all the
input signals disappear, the power management
function operates, and automatically turns the
power off/on. This operation is performed between
selected terminals.
Note
●
[Extended standby mode] is set to [Mode 2], and
greyed out.
■
[No signal power off]
When this is set to [Enable], the power supply of the
unit goes off automatically (standby) when there is no
operation or sync signal for about 10 minutes.
Note
●
When set to the USB input, the unit determines no
signal is present if the USB memory is not connected
to the USB terminal, or the connected USB memory
does not contain any playable file.
●
With Screen Transfer input, the unit determines no
signal is present in standby status and when the PC
is not connected to Screen Transfer.
●
This function operates regardless of the [On] / [Off]
settings of [No signal image settings].
●
This function may not operate depending on the video
output devices.
65
English
Advertisement
Table of Contents
