Recall; Volume Adjustment; Sound Mute On / Off - Panasonic TH-70SF2HU Operating Instructions (Functional Manual)

RECALL

It is possible to check the setting status of input label,
picture mode, etc.
Press <RECALL>.
Current setting status will be displayed.
10:00
1 Input label
2 Aspect mode (see page 34)
3 Backup input change (see page 71, 72)
4 Audio input (see page 72)
5 Profile name (see page 46)
6 [Schedule play mode] (see page 102)
7 Off timer remaining time (see page 33)
8 Clock / Mute (see page 32, 76)
●
When there is no video signal to the selected input,
[No signal] is displayed for about 30 seconds at the
end.
●
When a USB memory is not connected to the USB
terminal at the time of switching to the USB input, [No
external media] is displayed for about 30 seconds.
Even when a USB memory is connected, if it does not
contain any playable file, [No play file] is displayed at
all times.
● When [No signal image settings] - [Display setting] is
set to [On] (see page 55), the message [No signal] /
[No external media] / [No play file] are not displayed.
Instead, the image set in [No signal image settings]
will be displayed.
●
To display the clock, set [Date and time] and then set
[Clock display] to [On]. (see page 58, 76)
32
English
HDMI1
16:9
Backup mode OK
AV IN
Memory name: MEMORY2
Schedule play mode
Off timer 90 min

Volume Adjustment

Press <VOL +> <VOL -> or <+ (Unit)> <- (Unit)> to
adjust volume.
Unit
INPUT
1
2
3
4
Volume (SPEAKERS)
5
6
●
The current sound volume level is memorised even if
the power is turned off.
●
When [Maximum VOL function] is set to [On], the
7
volume can only be adjusted to the maximum point
you set, and the displayed value turns red when it
8
reached its maximum. (see page 73)
●
When [Initial VOL function] is set to [On], the volume
will be at the set level when the display is turned on.
(see page 73)

Sound mute On / Off

It is useful when you want to mute the sound temporarily,
for example, when answering the phone or door.
Press <MUTE>.
● appears on the screen and the sound is muted.
Press again to reactivate the sound.
●
It is also reactivated when the power is turned on / off
or the volume level is changed.
●
While MUTE is active,
after operation.
●
When the image set in [No signal image settings]
(see page 55) is displayed,
operation.
●
In [ENGLISH(US)] OSD language,
[MUTE].
-
+
MENU ENTER
20
is displayed as a reminder
is not displayed after
is displayed as