Personnel Protective Equipment; For Your Own Safety During Operation - Optimum BF20 L Vario Operating Manual

OPTIMUM
M A S C H I N E N - G E R M A N Y
1.8

Personnel protective equipment

For certain work peersonnel protective equipment is required.
Protect your face and eyes
are exposed to hazards, a safety helmet with a face guard should be worn.
Use protective gloves when handling pieces with sharp edges
Use safety shoes when you position, dismantle or transport heavy components
Use ear protection if the noise level
Before starting work, make sure that the prescribed individual protection gear is available at the
workplace.
CAUTION!
Dirty or contaminated personnel protective equipment can cause disease. Clean it each
time after it has been used and once a week.
1.9

For your own safety during operation

WARNING!
Before activating the drilling-milling machine, double-check that this will not endanger
other people or cause damage to equipment.
Avoid any unsafe working practises:
Make sure your work does not endanger anyone.
The instructions in this manual need to be observed during assembly, handling, main-
tenance and repair.
Use protective goggles.
Switch off the drilling-milling machine before measuring the workpiece.
Do not work on the drilling-milling machine if your concentration is reduced, for example,
because you are taking medication.
Stay on the drilling-milling machine until the working spindle has come to a complete halt.
Use the prescribed protective equipment. Make sure to wear a well-fitting work suit, when
necessary, a hairnet.
Do not use protective gloves during drilling or milling work.
Unplug the shockproof plug from the mains, before changing the tool.
Use suitable devices for removing drilling and milling chips.
Make sure your work does not endanger anyone.
Clamp the workpiece tightly before activating the drilling-milling machine.
In the description of work with and on the drilling-milling machine we highlight the dangers
specific to that work.
Page 12 Drilling-Milling machine
: During all work and specifically work during which your face and eyes
(immission) in the workplace exceeds 80 dB (A).
BF 20 Vario ; BF 20 L Vario
.
.
Version 3.1.4
Safety
9 / 03 / 2010