Optimum BF20 L Vario Operating Manual page 41

Maintenance
Interval Where?
As required
As required
9 / 03 / 2010
What? How?
Readjust
X- and Y- axis
Turn the adjusting screw of the respective taper gib in the
clockwise direction. The taper gib is continued to push in
and reduced by it the gap in the guideway.
Control your setting. The respective guideway must be
still easily mobile from the adjustment, result in however a
stable guidance.
Readjust
Z-axis
Proceed as described under "Readjust X- and Y-axis".
Version 3.1.4 BF 20 Vario ; BF 20 L Vario
OPTIMUM
M A S C H I N E N - G E R M A N Y
Cross table
Adjusting screw taper gib X axis
Adjusting screw taper gib Y-axis
Fig.5-2: Cross table
Adjusting screw taper gib Z-axis
Fig.5-3: Mill head
Drilling-Milling machine Page 41