Table of Contents
Advertisement
The areas marked by the pictogram might contain live parts, even if the master switch is
switched off.
In the "0" position, the lockable main switch can be secured against accidental or non-author-
ised switching on by means of a padlock.
The power supply is cut off when the master switch is in the off position.
Master switch
1.11.2 Drill chuck guard
Adjust the guard to the correct height before you start working.
To do so, slacken the clamping screw, set the required height and re-tighten the clamping
screw.
There is a switch integrated in the spindle protection mounting which monitors the closed posi-
tion.
INFORMATION
The machine cannot be started, if the drill chuck guard is not closed and the locking pin
of integrated drill drift is in drifting position.
Locking pin
Integrated
Drill drift
Drill chuck guard
1.12
Personal protective equipment
For some works you need personnel protective equipment as protective equipment. These are
Safety helmet,
Safety
Version 1.0.2 - 2020-07-06
Img. 1-3: Master switch
Img. 1-4: Drill chuck guard
Translation of original instruction
DH35V
EN
15
Advertisement
Table of Contents
