Personnel Protective Equipment; For Your Own Safety During Operation - Optimum Optimill BF 30V Operating Manual

1.11

Personnel protective equipment

For certain work personal protective equipment is required.
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
works where your face and eyes are exposed to hazards.
Use protective gloves when handling pieces with sharp edges.
Use safety shoes when you assemble, disassemble or transport heavy components.
Use ear protection if the noise level (emission) in the workplace exceeds 80 dB (A).
Before starting work make sure that the prescribed personnel protective equipment is available
at the working place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause diseases. Clean it each
time after use and once a week.
1.12

For your own safety during operation

WARNING!
Before activating the drilling-milling machine assure yourself that this will neither
endanger other persons nor cause damage to equipment.
Avoid any risky working practices:

Make sure that nobody is endangered by your work.

The instructions mentioned in these operating instructions have to be strictly observed dur-
ing assembly, operation, maintenance and repair.

Wear safety goggles.

Switch off the drilling-milling machine before measuring the workpiece.

Do not work on the drilling-milling machine, if your concentration is reduced, for example,
because you are taking medication.

Stay on the drilling-milling machine until the working spindle has come to a complete stand-
still.

Use the prescribed personnel protective equipment. Make sure to wear a well-fitting work
suit and, if necessary, a hairnet.

Do not use protective gloves when drilling or milling.

Disconnect the shock-proof plug from the outlet before replacing the tool.

Use appropriate auxiliary materials to remove drilling and milling chips.

Make sure that nobody is endangered by your work.

Safely and firmly clamp the workpiece before switching on the drilling-milling machine.
We specially point out the specific dangers when working with and on the drilling-milling
machine.
Safety
Version 1.1.5 dated 2015-08-31 Original operating instructions
OPTIMUM
M A S C H I N E N - G E R M A N Y
BF30Vario GB
Page 15