Optimum BF20 L Vario Operating Manual page 42

OPTIMUM
Maintenance
M A S C H I N E N - G E R M A N Y
Interval Where? What? How?
Lamp holder
Halogen pin base lamp
Lamp cover
Replacing the
As required
halogen lamp
Fig.5-4: Replacing the halogen lamp
Tilt the mill head a little to the right. This way you can
easily remove the lamp cover in order to allow replacing of
the halogen lamp.
Plug a small screw driver into the recess between the
lamp holder and the lamp cover.
By slightly turning the screw driver you can remove the
lamp cover.
Pull the halogen pin base lamp with a cloth and replace
the halogen lamp.
Type:
Halogen pin base lamp, Osram 12V - 10W, base G4
Page 42 Drilling-Milling machine BF 20 Vario ; BF 20 L Vario Version 3.1.4 9 / 03 / 2010