Table of Contents
Advertisement
HOW TO USE THE CGI COMMANDS
CAMERA CONTROL
When a Panasonic combination camera (WV-CW860, WV-CS850, etc.) or a pan-tilt head is connected to the VIDEO IN
connector of the encoder, it is possible to control the camera using the CGI commands.
■ Format
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=(parameter value)&(parameter name)=(parameter
value)&...&(parameter name)=(parameter value)
■ Response
HTTP /1.1 204 No Content
Cache-Control: no-cache
Content-Type: text/plain
Content-Length: 0
CR
LF
■ Item List
Item
Video input channel
Preset position
Horizontal control of the pan-tilt head PAN
Vertical control of the pan-tilt head
Lens
Auto pan control
Auto focus control
Focus control
86
CR
LF
CR
LF
CR
LF
CR
LF
Parameter name
CHSEL
PRESET
TILT
ZOOM
ATPAN
AF
FOCUS
Parameter value
Description
1 - 4
To designate VIDEO IN to be controlled
0 - 64
To move to a preset position set in
advance
0: Home position
1 - 64: Preset position
–10 - –1
To move left
1 - 10
To move right
–10 - –1
To move downward
1 - 10
To move upward
–10 - –1
To move to WIDE
1 - 10
To move to TELE
It will take around 30 ms for one step
increment or decrement of the FOCUS
parameter to adjust focusing.
on, off
To start/stop auto pan.
on
Auto focus
–10 - –1
NEAR
1 - 10
FAR
It will take around 60 ms for one step
increment or decrement of the ZOOM
parameter to adjust zooming.
Advertisement
Table of Contents
