Table of Contents
Advertisement
CAMERA CONTROL page
It is possible to control the camera or to display the
camera picture on the monitor on this page.
It is also possible to display the settings menus of the
camera and perform the settings.
Notes
• Depending on the connected camera, some
functions may not be available.
Refer to the operating instructions of the connected
camera about its functions.
• Streaming video will be displayed on the monitor
connected to the decoder. When the encoder is
connected to the monitor directly, connect the
monitor to the VIDEO OUT connector respective to
the camera whose picture is to be monitored. (For
example, to control the camera or to monitor the
picture of the camera connected to the VIDEO IN 1
connector, connect the monitor to the VIDEO OUT 1
connector.)
■ Item Descriptions
VIDEO IN
Numbers of the VIDEO IN connectors on the rear
panel of the encoder
It is possible to control the camera connected to the
clicked VIDEO IN connector number.
AUTO PAN
START
The auto functions (AUTO PAN, SEQ, SORT,
PATROL, etc.) set on the camera will be performed
by clicking this button.
Depending on the camera, the functions using this
button differ.
Refer to the operating instructions of the camera for
further information.
STOP
The auto functions (AUTO PAN, SEQ, SORT,
PATROL, etc.) set on the camera will be stopped by
clicking this button.
They will be stopped also by clicking any other
button.
Note: The auto functions are functions of the
camera. It is impossible to operate an auto
function if it is not set on the camera.
PRESET POSITION
The camera pans to the selected preset position
when the [GO] button is clicked after selecting the
HOME position or a preset position number from 1 to
64.
Depending on the camera, the selectable preset
position numbers may differ.
Note: The preset function is a function of the
camera. It is impossible to operate it if preset
positions are not set on the camera.
PAN/TILT
The camera pans one step toward the clicked
direction.
The rotation distance or speed vary depending on
the camera.
ZOOM
Click the [WIDE] or [TELE] button to control the
zoom lens of the camera.
Note: It is impossible to keep zooming by holding
down the [WIDE] or [TELE] buttons.
63
Advertisement
Table of Contents
