SETUP
The "Local Area Connection Properties" window appears.
Note: If the "Internet Protocol (TCP/IP)" item is not displayed,
refer to the operating instructions of the OS and follow the
procedures to install the TCP/IP.
The "Internet Protocol (TCP/IP) Properties" window appears.
38
3. Click to select "Internet Protocol (TCP/IP)",
and then click the [Properties] button.
4. Click the "Use the following IP address"
radio button and enter the IP address and
the subnet mask as follows.
• IP address:
192.168.0.9
• Subnet mask:
255.255.255.0
5. Click the [OK] button, and the window
closes.