Table of Contents
Advertisement
SETUP
The "Network Connections" window appears.
The "Local Area Connection Properties" window appears.
The "Internet Protocol (TCP/IP) Properties" window appears.
40
4. Click to select "Local Area Connection", and
then click "Change settings of this
connection" in the "Network Tasks" menu.
5. Click to select "Internet Protocol (TCP/IP)",
and then click the [Properties] button.
Note: If the "Internet Protocol (TCP/IP)" item is
not displayed, refer to the operating
instructions of the OS and follow the
procedures to install the TCP/IP.
6. Click the "Use the following IP address"
radio button and enter the IP address and
the subnet mask as follows.
• IP address:
192.168.0.9
• Subnet mask:
255.255.255.0
7. Click the [OK] button, and the window
closes.
Advertisement
Table of Contents
