Table of Contents
Advertisement
Item
Iris control
Defroster control
Wiper control
AUX1 output control
AUX2 output control
■ Important Notices
• It is necessary to enter the parameter value for the "CHSEL" parameter.
• When controlling the pan-tilt head, it is necessary to enter the parameter value for both the vertical control (TILT)
and the horizontal control (PAN).
For example, to move the camera connected to the VIDEO IN 1 connector to the left, enter:
http://(IP address of the encoder)/cgi-bin/camctrl.cgi?CHSEL=1&PAN=-4&TILT=0
■ Examples
1. To move the pan-tilt head connected to the VIDEO IN 1 connector upward
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=1&PAN=0&TILT=4
2. To zoom out (WIDE) the camera connected to the VIDEO IN 2 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=2&ZOOM=-2
3. To start auto pan of the pan-tilt head connected to the VIDEO IN 3 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=3&ATPAN=on
4. To set the focus of the camera connected to the VIDEO IN 4 connector to NEAR
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=4&FOCUS=-2
5. To close the iris of the camera connected to the VIDEO IN 1 connector
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=1&IRIS=-1
6. To set the wiper of the camera connected to the VIDEO IN 2 connector to ON
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=2&WIPER=on
7. To set the AUX 1 of the camera connected to the VIDEO IN 3 connector to OFF
http://192.168.0.10/cgi-bin/camctrl.cgi?CHSEL=3&AUX1=off
Parameter name
Parameter value
IRIS
–10 - –1
0
1 - 10
DEF
on, off
WIPER
on, off
AUX1
on, off
AUX2
on, off
Description
CLOSE
RESET
OPEN
It will take around 60 ms for one step
increment or decrement of the IRIS param-
eter to adjust the iris.
87
Advertisement
Table of Contents
