Panasonic WJ-GXE900 Operating Instructions Manual page 64

Mpeg2 encoder; mpeg2 decoder
Hide thumbs Also See for WJ-GXE900:
Table of Contents

Advertisement

SETTINGS MENUS OF THE ENCODER
FOCUS
Adjust the focus of the camera by clicking the
[NEAR], [FAR] or [AUTO] buttons.
NEAR: Focusing on near objects
FAR: Focusing on far objects
AUTO: Focusing on objects in the center on the
displayed area
Note: It is impossible to keep focusing by holding
down the [NEAR] or [FAR] buttons.
IRIS
Adjust the iris of the camera by clicking the [CLOSE],
[OPEN] or [RESET] buttons.
Generally, to shoot an object with a clear background
or to shoot an object in a bright location, close the
iris.
OPEN: The depth of the field becomes shallower by
opening the iris.
CLOSE: The depth of the field becomes deeper by
closing the iris.
RESET: The iris setting is reset to the default setting.
Note: It is impossible to keep adjusting the iris by
holding down the [OPEN] or [CLOSE] buttons.
CAMERA MENU
OPEN: The setting menu of the camera will be
displayed on the monitor connected to the
decoder and the CAMERA MENU CONTROL
page will appear on the monitor connected to the
PC by clicking this button.
CLOSE: The settings menu of the camera will
disappear from the monitor and the CAMERA
MENU CONTROL page will be closed by clicking
this button.
AUX1/AUX2
To activate an external device (AUX1/AUX2)
connected to the camera housing or the receiver,
select "ON".
To deactivate an external device (AUX1/AUX2),
select "OFF".
When using a receiver, set the AUX1/AUX2 mode of
the receiver to "Latch" mode. When "momentary" is
selected, the receiver will not function correctly.
WIPER
To activate the wiper of the camera housing, select
"ON".
To deactivate the wiper of the camera housing,
select "OFF".
64
DEFROSTER
To activate the defroster of the camera housing,
select "ON".
To deactivate the defroster of the camera housing,
select "OFF".
PROGRAM PRESET
It is possible to register the displayed angle of view
to the camera as a preset position.
To register it, select the desired preset position
(HOME or 1 - 64) and click the [SET] button.
Note: It is impossible to register it if the camera does
not have the preset function.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-gxd900

Table of Contents