Table of Contents
Advertisement
SETTINGS MENUS OF THE ENCODER
HOW TO UPDATE THE FIRMWARE
It is possible to update to the firmware of the encoder.
1. Acquire the file for update and copy it into the
desired directory on the PC.
2. Transfer the file from the PC to the encoder.
Follow the procedure below to transfer using the MS-
DOS command.
1. Start up the DOS prompt.
• Except Windows XP
[Start] – [Programs] – [Accessories] – [MS-DOS
prompt]
• In case of Windows XP
[Start] – [Programs] – [Accessories] – [Command
prompt]
2. Connect to the encoder to be updated using the
"ftp" command.
Example: c: \ftp 192.168.0.10
3. Enter a user name with the access level 1
(ADMINISTRATOR) and the respective password
when authentication is required.
4. Enter the "bin" command to change to the binary
mode.
5. Transfer the file for update to the encoder using
the "put" command.
Example: put (name of the file to be transferred)
6. Confirm the file has been transferred by checking
the file name using the "ls" command.
3. Click the [START] button to update the firmware on
the MAINTENANCE page.
4. Click the [RESTART] button to restart the encoder.
Access to the encoder after around 3 minutes then
confirm the version of the firmware on the top page.
62
Advertisement
Table of Contents
