Table of Contents
Advertisement
SETTINGS MENUS OF THE DECODER
To receive the motion pictures sent from the encoder, do
the following.
Refer to a network administrator about the required
network addresses (IP addresses, etc.).
1. Enter the IP address of the decoder in the address
box of the web browser and press the Enter key.
For example, enter the default IP address of the
decoder "192.168.0.11" in the address box of the
web browser.
http://192.168.0.11/
The top page will be displayed.
The top page of the decoder
66
2. Click a desired button in the left column on the top
page.
The authentication dialog window will be displayed.
Enter a user name whose access level is 1
(ADMINISTRATOR) and a password, and click the
[OK] button.
If the entered user name and password are
registered, the settings page will be displayed.
When no user is registered yet, enter the default user
name (admin) and password (blank: enter nothing).
(To register users, go to the USER page.)
When authenticated, the top page will be displayed
again.
When authenticated once, the authentication dialog
window will not be displayed by clicking the buttons
in the left column until the web browser window is
closed.
The items on the next page can be checked or
changed on each settings page.
Click the [SET] button after changing the settings.
Advertisement
Table of Contents
