Table of Contents
Advertisement
Symptom
The image is disturbed
(drop frame, etc.).
Audio troubles
•
Audio fragmentation occurs.
No audio.
84
Possible cause / Possible solution
• Is a temporary network trouble (a broken wire,
connection trouble, etc.) occurring?
When temporary software trouble occurs, it will be
recovered automatically.
Depending on the status of the trouble, communication
might be disconnected. In this case, try to connect again.
If this happens frequently, reconsider the network
connections.
• Transmission delay may have occurred on the network.
Perform the setting of "LATENCY BUFFER" on the
VIDEO page of the decoder properly.
• Is a temporary network trouble (breaking of wire,
connection trouble, etc.) occurring?
When temporary software trouble occurs, it will be
recovered automatically.
Depending on the status of the trouble, communication
might be disconnected. In this case, try to connect again.
If this happens frequently, reconsider the network
connections.
• Is the audio device connected to the AUDIO OUT
connector correctly?
Connect the audio input connector of a monitor or
speakers to the AUDIO OUT connector of the
decoder correctly.
• Do the audio input and output levels match?
The AUDIO IN/OUT connectors of the encoder/decoder
are the LINE IN/OUT. It is necessary to connect the
microphone amplifier and the speaker amplifier.
• Is the setting for "AUDIO INPUT" of the AUDIO page of
the encoder set to "OFF"?
Check the settings on the AUDIO page of the encoder.
• Is the audio received by the decoder muted?
Release muting.
Reference page
–
70
–
15
–
46
106
Advertisement
Table of Contents
