Controlling Start /Stop Of The Encoder - Panasonic WJ-GXE900 Operating Instructions Manual

HOW TO USE THE CGI COMMANDS

CONTROLLING START /STOP OF THE ENCODER

Start and stop the transmission of streaming video and audio data from the encoder.
■ Format
● Start encoding (Streaming transmission)
http://(IP address of the encoder)/control4?encode=start&ch=(parameter value)
● Stop encoding (Stop streaming transmission)
http://(IP address of the encoder)/control4?encode=end&ch=(parameter value)
■ Response
HTTP /1.1 200 OK
Cache-Control: no-cache
Content-Type: text/plain
Content-Length: XX
CR
LF
OK or NG
■ Important Notice
• "encode=start&ch=(Parameter value)" or "encode=end&ch=(Parameter value)" (Required)
■ Control Item List
● Start encoding
Item
Start encoding
VIDEO IN connector number
● Stop encoding
Item
Stop encoding
VIDEO IN connector number
92
CR
LF
CR
LF
CR
LF
CR
(Store the octet number of the Message-Body decimally)
LF
Parameter name
encode
ch
Parameter name
encode
ch
Parameter value Description
start Identifier to start decoding
01 - 04 Select a VIDEO IN connector number
which starts encoding
Parameter value Description
end Identifier to stop decoding
01 - 04 Select a VIDEO IN connector number
(01 - 04) which stops encoding