Table of Contents
Advertisement
Setup with the Provided "Panasonic IP Setup" Software
Set up the network of the encoder/decoder by using the "Panasonic IP Setup" software included on the provided CD-
ROM.
Note: If a firewall (including software) exists, allow access to all UDP ports. Otherwise, it is impossible to use the
"Panasonic IP Setup" software.
Items included in the software
• IPSETUP (Panasonic IP Setup)
• Operating Instructions (pdf file)
1. Double click the "IPSETUP" icon.
The "Panasonic IP Setup" starts up.
The MAC address and the IP address of the connected encoder/decoder will be displayed. (Click the [REFRESH]
button if they are not displayed.)
2. Click the MAC address/IP address of the
encoder/decoder to be set up.
3. Click the [NETWORK SETUP] button.
33
Advertisement
Table of Contents
