1 Main Unit
1 Main Unit
1.1 Camera Adaptor (BY-HPE11R)
Front view
A
D
C
10
Operating Instructions
A Indicator
Displays the status of the camera adaptor (see
page 13).
B PoE switch
Turns the PoE function ON/OFF. The default
setting is [ON].
IMPORTANT
B
C BNC connector
Connects the camera adaptor to the center
E
adaptor with a coaxial cable (see
3.2 Connections in the Installation Guide).
D Network connector
Connects the camera adaptor to a network
camera with a LAN cable (see
3.2 Connections in the Installation Guide).
E INITIAL SET button
Used to reset the camera adaptor to its factory
default settings (see page 14).
•
When using the camera adaptor's PoE
function to supply power to a network
camera, set the PoE switch to [ON].
When not using the PoE function (when
powering the network camera with an
AC adaptor), set it to [OFF].
•
The PoE function cannot be used for
connections over 500 m. Set the PoE
switch to [OFF].