Camera; Camera Registration - Panasonic WJ-GXD400 Setup Instructions

Camera

The network settings (such as address and port number) of cameras, group settings, and the settings of sequential
display are performed in this section.

Camera Registration

Registration and change of the network camera are performed. The list of the registered cameras is shown. In addi-
tion, the camera settings relating to the network such as IP address and port number are performed.
1
Click the [Camera] button on the setup menu.
2
Click the [NW camera] tab.
The "Registered camera list" window will be dis-
played.
Refer to "Registered camera list" for the displayed
contents.
3
Select the radio button of the camera number to
be registered.
26
4
Click the [Set] button.
The "NW camera setup" window will be displayed.
5
Perform the settings for each item.
Refer to the "NW camera setup" for information on
how to configure the settings.
6
Click the [Information inquiry] button.
The information of the specified live image source is
obtained.
Refer to the "Information inquiry list" for information
on how to configure the settings.
Not all information can be obtained. Perform addi-
tional settings if necessary.
7
Click the [Set] button.