Specifications - Panasonic WJ-GXE900 Operating Instructions Manual

Mpeg2 encoder; mpeg2 decoder
Hide thumbs Also See for WJ-GXE900:
Table of Contents

Advertisement

SPECIFICATIONS

●ENCODER
Basic Specification
Power Source
Power Consumption
Ambient Operating Temperature
Ambient Operating Humidity
Weight
Dimensions
Input/Output
Video Input
Video Output
Audio Input
Video Compression Method
Audio Compression Method
Resolutions
Frame Rate
Bit Rate
Serial Port
Alarm Input
Trigger Output
Reset Input
Network Interface
Network Interface
Compatible Network Protocols
Security measures
Standard Accessories
• Simple Mounting Bracket for a Container Box ..........................................4
• Fixing Screw for Simple Mounting Bracket (M3x6) ...................................8
• Code Label (on which the MAC address is written) ..................................1
• Description Label 1....................................................................................1
• Description Label 2....................................................................................1
• CD-ROM....................................................................................................1
• Quick Reference Guide .............................................................................1
• Warranty....................................................................................................1
116
120 V AC 60 Hz
23 W
–10 °C - +50 °C (14 °F - 122 °F)
Less than 90% (non-condensing)
Approx. 2.9 kg (6.4 lbs.)
210 mm (W) x 44 mm (H) x 300 mm (D)
[8-1/4" (W) x 1-3/4" (H) x 11-13/16" (D)] (Rubber feet excluded)
1.0 V[p-p]/75 Ω (Multiplex control signal), NTSC Composite, BNC (x4)
1.0 V[p-p]/75 Ω, NTSC Composite D-sub 9pin (x4)
–10 dBv, more than 10 kΩ, Unbalanced, D-sub 9pin (x4)
MPEG2-TS, SP@ML
®
Dolby Digital
720 x 480 pixels max. (Effective pixels: 704 x 480)
30 fps
1.5 Mbps, 3.0 Mbps, 3.8 Mbps, 4.6 Mbps, 6.1 Mbps, 9.2 Mbps
RS-485, four-wire system, RJ-11, Termination resistor ON/OFF switch, 4 800
bps, 9 600 bps, 19 200 bps
Dry contact, Terminal (x4)
Open Collector output, Terminal (x4)
Current loop or dry contact, Terminal (x1)
100BASE-TX, RJ-45
IP, ICMP, IGMP v2, BOOTP, TCP, UDP, HTTP, RTP, SNMP, NTP, FTP, DHCP
Password authentication, Encryption of video and audio data (Hardware)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-gxd900

Table of Contents