Table of Contents
Advertisement
Video In Menus
The VIDEO IN menus are activated by pushing the VIDEO IN button on the UFC front panel. These menus allow
the user to select the input video format for the system. The format, and frame rate, are selected independently, with
the system providing feedback to the user if the format & frame rate selected are not compatible. These menus also
allow the user to select film processing modes and to select the source of the 3:2 reference. Pull-down mode selects
the frame processing that will be performed by the system: either none, 2:2 pull-down, or 3:2 pull-down. For 3:2
pull-down cases, a reference must be provided to signal the start of a 5 frame, 3:2 sequence. This reference may
come from time code, SMPTE 318 black burst with frame flags or can be manually set.
VIDEO IN
If SD or HD auto detect mode is selected, then the related SDI input is monitored for format information. If a valid
format is detected, then the system is configured for that particular format
V I D E O I N
F O R M A T : 1 9 2 0 X 1 0 8 0 i
F O R M A T
F1
F1 – Activates knob to select an input video format (e.g., AUTO HD, 1920x1080I, 1280x720P).
F2 – Activates knob to select an input frame rate (AUTO HD, AUTO SD, 60, 59.94, 50, 48, 47.95, 30, 29.97, 25,
24, 23.98).
F3 – Activates knob to select the 2:2 or 3:2 pull-down frame processing mode for input (OFF, 2:2 or 3:2).
VIDEO IN (auto format mode)
V I D E O I N
F O R M A T : A U T O H D
d e t e c t e d m o d e : 1 9 2 0 x 1 0 8 0 i / 3 0 H z
F O R M A T
F1
Note: Function keys operate the same as above.
Video Out Menu
The VIDEO OUT menu is activated by pushing the VIDEO OUT button on the UFC front panel. This menu allows
the user to select the output video format for the system. The format and frame rate are selected independently, with
the system providing feedback to the user if the format & frame rate selected are not compatible. The output frame
rate must also match the input frame rate; either matching exactly, or related through 2:2 or 3:2 pull-down (for
example: if the input frame rate is 60, the output may be 60, 30, or 24).
V I D E O O U T
F O R M A T : 1 9 2 0 X 1 0 8 0 i
F O R M A T
F1
F1 – Activates knob to select an output video format (e.g., 1920x1080I, 1280x720P).
F2 – Activates knob to select an output frame rate (60, 59.94, 50, 48, 47.95, 30, 29.97, 25, 24, 23.98).
F3 – Selects either field or frame filtering for 2:2 or 3:2 film outputs. This selection only appears when it is
appropriate.
F R A T E
P U L L D N
F2
F3
F R A T E
P U L L D N
F2
F3
F R A T E
F L D / F R M
F2
F3
3 0 H z
F4
F5
F4
F5
2 4 H z
F4
F5
17
EXIT
EXIT
EXIT
Advertisement
Table of Contents
