Network Setup; Network Settings Of The Pc - Panasonic WJ-GXD400 Setup Instructions

Network Setup

Network Settings of the PC

The TCP/IP setting of the PC shall be changed to conform to the settings of this unit. The IP address of the PC shall
be specified within the same subnet range as that of the network port of this unit to access this unit.
In these operating instructions, the settings are performed on Windows Vista as examples. Refer to the operating
instructions of the respective OS for further information.
Example:
To use this unit with the default settings (IP address: 192.168.0.250), the IP address of the PC should be
"192.168.0.XXX (XXX is a value between 2 and 254 except 250 (that is assigned to this unit)".
1
Log in to the PC as an administrator.
2
On the taskbar, click "Start", and then click the
"Control Panel".
The control panel will be displayed.
3
Click [View network status and tasks].
The "Network and Sharing Center" window will be
displayed.
12
4
Click [View status].
The "Local Area Connection Status" window will be
displayed.
5
Click "Properties".
The "Local Area Connection Properties" window will
be displayed.