Track An Ipv4/Ipv6 Route - Dell S4820T Configuration Manual

The default is 0.
3. (Optional) Identify the tracked object with a text description.
OBJECT TRACKING mode
description text
The text string can be up to 80 characters.
4. (Optional) Display the tracking configuration and the tracked object's status.
EXEC Privilege mode
show track object-id
Example of Configuring Object Tracking (IPv4 Interface)
Example of Configuring Object Tracking (IPv6 Interface)
Dell(conf)#track 101 interface tengigabitethernet 7/2 ip routing
Dell(conf-track-101)#delay up 20
Dell(conf-track-101)#description NYC metro
Dell(conf-track-101)#end
Dell#show track 101
Track 101
Interface TenGigabitEthernet 7/2 ip routing
Description: NYC metro
Dell(conf)#track 103 interface tengigabitethernet 7/11 ipv6
routing
Dell(conf-track-103)#description Austin access point
Dell(conf-track-103)#end
Dell#show track 103
Track 103
Interface TenGigabitEthernet 7/11 ipv6 routing
Description: Austin access point

Track an IPv4/IPv6 Route

You can create an object that tracks the reachability or metric of an IPv4 or IPv6 route.
You specify the route to be tracked by its address and prefix-length values. Optionally, for an IPv4 route,
you can enter a VRF instance name if the route is part of a VPN routing and forwarding (VRF) table. The
next-hop address is not part of the definition of a tracked IPv4/IPv6 route.
In order for an route's reachability or metric to be tracked, the route must appear as an entry in the
routing table. A tracked route is considered to match an entry in the routing table only if the exact IPv4 or
IPv6 address and prefix length match an entry in the table. For example, when configured as a tracked
route, 10.0.0.0/24 does not match the routing table entry 10.0.0.0/8. Similarly, for an IPv6 address,
3333:100:200:300:400::/80 does not match routing table entry 3333:100:200:300::/64. If no route-table
entry has the exact IPv4/IPv6 address and prefix length, the tracked route is considered to be DOWN.
In addition to the entry of a route in the routing table, you can configure the UP/DOWN state of a tracked
route to be determined in the following ways:
• By the reachability of the route's next-hop router.
Object Tracking
677