Display Information About User Roles - Dell S4820T Configuration Manual

Display Information About User Roles

This section describes how to display information about user roles.
This sections consists of the following topics:
• Displaying User Roles
• Displaying Information About Roles Logged into the Switch
• Displaying Active Accounting Sessions for Roles
Displaying User Roles
To display user roles using the show userrole command in EXEC Privilege mode, use the show
userroles and show users commands in EXEC privilege mode.
Examples of Displaying User Roles
Dell#show userroles
Role Inheritance
netoperator
netadmin
Protocol MAC
secadmin
sysadmin
Protocol MAC
testadmin netadmin
Protocol MAC
Displaying Role Permissions Assigned to a Command
To display permissions assigned to a command, use the show role command in EXEC Privilege mode.
The output displays the user role and or permission level.
Examples of Role Permissions Assigned to a Command
Dell#show role mode ?
configure
exec
interface
line
route-map
router
Dell#show role mode configure username
Role access: sysadmin
Dell##show role mode configure password-attributes
Role access: secadmin,sysadmin
Dell#show role mode configure interface
Role access: netadmin, sysadmin
Dell#show role mode configure line
Role access: netadmin,sysadmin
Displaying Information About Users Logged into the Switch
To display information on all users logged into the switch, using the show users command in EXEC
Privilege mode. The output displays privilege level and/or user role. The mode is displayed at the start of
896
Modes
Exec
Exec Config Interface Line Router IP Routemap
Exec Config
Exec Config Interface Line Router IP Routemap
Exec Config Interface Line Router IP Routemap
Global configuration mode
Exec Mode
Interface configuration mode
Line Configuration mode
Route map configuration mode
Router configuration mode
Security