Dell S4820T Configuration Manual page 474

Two existing exec mode CLIs are enhanced to display and store the running configuration in the
compressed mode.
show running-config compressed and write memory compressed
The compressed configuration will group all the similar looking configuration thereby reducing the size
of the configuration. For this release, the compression will be done only for interface related
configuration (VLAN & physical interfaces)
The following table describes how the standard and the compressed configuration differ:
int vlan 2 int vlan 3
no ip address tagged te 1/1
no shut no ip address
shut
int te 1/1 int te 1/2
no ip address no ip address
switchport shut
shut
Dell# show running-config
<snip>
!
interface TenGigabitEthernet 1/1
no ip address
switchport
shutdown
!
interface TenGigabitEthernet 1/2
no ip address
shutdown
!
interface TenGigabitEthernet 1/3
no ip address
shutdown
!
474
int vlan 4 int vlan 5
tagged te 1/1 tagged te 1/1
no ip address no ip address
shut shut
int te 1/3 int te 1/4
no ip address no ip address
shut shut
Dell# show running-config compressed
<snip>
!
interface TenGigabitEthernet 1/1
no ip address
switchport
shutdown
!
Interface group TenGigabitEthernet 1/2 – 4 ,
TenGigabitEthernet 1/10
no ip address
shutdown
!
interface TenGigabitEthernet 1/34
ip address 2.1.1.1/16
shutdown
!
int vlan 100 int vlan 1000
no ip address ip address
1.1.1.1/16
no shut
no shut
int te 1/10 int te 1/34
no ip address ip address
2.1.1.1/16
shut
shut
Interfaces