Center Frame; Retractable Modules; Landing Gear; Flight Control System - dji MATRICE 600 Disclaimer And Safety Manuallines

7. For the GPS in the remote controller to function properly and the Home Point to be accurate, ensure the
DJI logo is facing the sky and keep the remote controller away from any metal objects.
8. Linking is required if you wish to replace your remote controller or receiver or add a new remote controller.
Refer to the User Manual for details.

Center Frame

To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. DO NOT short out the reserved ports on the center frame.
2. There are two DC18V power ports and one LIPO-6S power port reserved on the center frame. The
DC18V power ports have an output voltage of 18 V and a maximum output current of 3 A. The
LIPO-6S power port has the same output voltage as the Intelligent Flight Battery and a maximum
output current of 10 A. Use the power ports in strict accordance with their specifications.
3. DO NOT damage the cables when mounting or removing the upper or lower plate of the center frame.

Retractable Modules

To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. DO NOT interchange the mounting positions of the left and right retractable modules. Identify the
left retractable module by locating the integrated control board.
2. DO NOT interchange the cabling of the left and right retractable modules, or else the landing gear
will not function normally.
3. Arrange the cables neatly to avoid them from being cut by the frame edges.

Landing Gear

To avoid component malfunction, serious injury, and property damage, observe the following rules:
1. The antennas are attached to the landing gear legs upon delivery. DO NOT move the antennas.
2. Before mounting the landing gear legs, pull out the antenna connector pins.
3. Be careful not to damage the antenna cables when mounting or removing the landing gear.
4. Watch your fingers when mounting the springs to the landing gear.
5. Ensure the landing gear is lowered before landing.

Flight Control System

To avoid component malfunction, serious injury, and property damage, observe the following rules:
Flight Controller
1. DO NOT attempt to modify the structure of the flight controller.
2. DO NOT change the mounting position and orientation of the flight controller.
3. DO NOT short out the ports on the flight controller.
©
2016 DJI. All Rights Reserved.
9