Emerson MCi210 User Manual page 37

S.04.011
Minimum
Default
Type
Display Format
Coding
If Digital I/O 4 is configured as an output (Digital Input/Output 4 Direction (S.04.021)), writing to this
parameter will set the state of Digital I/O 4. Setting to 0 will place the output low and setting to 1 will
place the output high.
#
S.04.020
Minimum
Default
Type
Display Format
Coding
Bitmapped parameter that can be used to set Digital I/O 4 Digital Output 5. This parameter is
effectively a combination of Digital Output 5 (S.04.010) and Digital Input/Output 4 Demand
(S.04.011).
Bit
Used to control the state of Digital Output 5:
0 • 0 = Output set low
• 1 = Output set high
Used to control the state of Digital IO 4:
• 0 = Output set low
1 • 1 = Output set high
This bit will only have an effect if digital input/output 4 is configured as an output
(Digital Input/Output 4 Direction (S.04.021)).
S.04.021
Minimum
Default
Type
Display Format
Coding
Setting this parameter to 0 will configure Digital I/O 4 as an input. Setting it to 1 will configure it as
an output.
MCi210 User Guide
Issue Number: 2
Digital Input/Output 4 Demand
0
0
1 Bit Volatile
None
RW
Digital Outputs State
0 (Display: 00)
0 (Display: 00)
8 Bit Volatile
Binary
RW, ND, NC, BU
Digital Input/Output 4 Direction
0
0
1 Bit Volatile
None
RW
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Description
Maximum
Units
Update Rate
Decimal Places
1
Immediate
0
3 (Display: 11)
Immediate
0
1
Immediate
0
37