Emerson MCi210 User Manual page 31

S.02.025
Minimum
Default
Type
Display Format
Coding
Value
0
1
2
This parameter specifies the operation mode of the gateway. By default the gateway is disabled
and the switch operates in normal switch mode, by enabling the gateway mode all packets are
filtered by the module and prioritized before being forwarded on. In strict mode the gateway will
drop packets from unsupported protocols.
S.02.030
Minimum
Default
Type
Display Format
Coding
This parameter controls whether the module will use VLAN tagging.
When used in conjunction with Drive VLAN ID (S.02.031) network traffic from the interface will be
tagged with the chosen VLAn identifier.
When default values for Drive VLAN ID (S.02.031) is set, enabling this parameter will add VLAN
prioritization to all packets helping to ensure real-time packets are not delayed by those of lower
priority. If disabled, prioritization will use the Diffserv field in IP traffic only, meaning non-IP traffic
can still affect real-time IP traffic.
S.02.031
Minimum
Default
Type
Display Format
Coding
This parameter specifies the VLAN ID that the interface will be a member of. Any packets entering
the switch without this VLAN ID will not be handled.
MCi210 User Guide
Issue Number: 2
Gateway Mode
0
0
8 Bit User Save
None
RW, Txt, BU
Text
Switch
Gateway
Strict Gateway
VLAN Enable
0
0
1 Bit User Save
None
RW
Drive VLAN ID
0
0
8 Bit User Save
None
RW, BU
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
2
Read on module reset
0
1
Background read
0
255
Read on module reset
and VLAN_ENABLE
0
31