Emerson MCi210 User Manual page 51

S.10.046
S.10.056
S.10.066
Minimum
Default
Type
Display Format
Coding
Value Text
0 Trip
1 Send flt values
2 Clear output
This parameter defines the action to be taken for a timeout on the receive link.
S.10.047
S.10.057
S.10.067
Minimum
Default
Type
Display Format
Coding
Value
0 This slot
1 Slot 1
2 Slot 2
3 Slot 3
4 Slot 4
This parameter defines the slot in which an event will occur if a cyclic data timeout occurs on the
receive link.
MCi210 User Guide
Issue Number: 2
Rx1 Link Timeout Action
Rx2 Link Timeout Action
Rx3 Link Timeout Action
0
0
8 Bit User Save
None
RW, BU
Trip drive with Slotx Error and sub-trip code yyy, where x is the
slot number in which the module is installed.
Send configured fault values to the output parameters
PLC output parameters will have their values set to zero
Rx1 Link Timeout Event Destination
Rx2 Link Timeout Event Destination
Rx3 Link Timeout Event Destination
0
0
8 Bit User Save
None
RW, Txt, BU
Text
Trigger module event in this slot
Trigger module event in slot 1
Trigger module event in slot 2
Trigger module event in slot 3
Trigger module event in slot 4
Maximum
Units
Update Rate
Decimal Places
Description
Maximum
Units
Update Rate
Decimal Places
Description
2
ms
Read on reset
0
4
Read on reset
0
51