Emerson MCi210 User Manual page 57

S.11.010
Minimum
Default
Type
Display Format
Coding
This parameter displays the current date. If the module has no time source it will display the date
based on its power-up date of 1st January 1970.
S.11.011
Minimum
Default
Type
Display Format
Coding
This parameter displays the current time. If the module has no time source it will display the date
based on its power-up date of 00:00:00.
S.11.013
Minimum
Default
Type
Display Format
Coding
Value
0
1
This parameter selects the transport layer to use. 0 = Layer 2 Ethernet; 1 = UDP.
Layer 2 Ethernet packet sizes are smaller than the packet sizes of UDP.
NOTE
MCi210 User Guide
Issue Number: 2
PTP Date
0 (Display: 00-00-00)
32 Bit Volatile
Time
RO, ND, NC, PT, BU
PTP Time
0 (Display: 00:00:00)
32 Bit Volatile
Time
RO, ND, NC, PT, BU
Network Transport Layer Select
0
1
8 Bit User Save
None
RW, Txt, BU
Text
802.3
UDP
Maximum
Units
Update Rate
Decimal Places
Maximum 235959 (Display: 23:59:59)
Units
Update Rate Written every 500 ms
Decimal Places 0
Maximum
Units
Update Rate
Decimal Places
235959 (Display: 23:59:59)
Written every 500 ms
0
1
Read on reset
0
57