Emerson MCi210 User Manual page 46

S.10.012
S.10.022
S.10.032
Minimum
Default
Type
Display Format
Coding
This parameter sets the first source parameter for the transmit link.
If a profile has been selected in Tx Link Profile (S.10.010, S.10.020 or S.10.030) then this
parameter will become read-only with value of 0.
S.10.013
S.10.023
S.10.033
Minimum
Default
Type
Display Format
Coding
This parameter is used to set the number of contiguous parameters for the transmit link.
If a profile has been selected in Tx Link Profile (S.10.010, S.10.020 or S.10.030) then this
parameter will become read-only with value of 0.
S.10.014
S.10.024
S.10.034
Minimum
Default
Type
Display Format
Coding
46
Tx1 Link Source Parameter
Tx2 Link Source Parameter
Tx3 Link Source Parameter
0 (Display: 0.00.000)
0 (Display: 0.00.000)
32 Bit User Save
Slot.Menu.Param
RW, PT, BU
Tx1 Link Parameter Count
Tx2 Link Parameter Count
Tx3 Link Parameter Count
0
0
8 Bit User Save
None
RW, BU
Tx1 Link Transmission Type
Tx2 Link Transmission Type
Tx3 Link Transmission Type
0
0
8 Bit User Save
None
RW, TE, BU
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
499999
(Display: 4.99.999)
Read on reset
0
32
Read on reset
0
5
Read on reset
0
MCi210 User Guide
Issue Number: 2