Emerson MCi210 User Manual page 62

S.15.002
Minimum
Default
Type
Display Format
Coding
This parameter is used to perform a warm reset of the protocol interface. When set and the protocol
has reset, the parameter will be reset to zero (Off).
S.15.003
Minimum
Default
Type
Display Format
Coding
This parameter allows the protocol to be defaulted to factory settings. This includes all of the
protocol features, configuration, mappings and stored objects.
S.15.004
Minimum
Default
Type
Display Format
Coding
Value Text
0 No error
1 Port in use
2 Timeout event
This parameter will indicate any Modbus configuration errors.
62
Reset
0
0
1 Bit Volatile
None
RW
Default
0
0
1 Bit Volatile
None
RW
Modbus Configuration Error
0
8 Bit Volatile
None
RO, Txt, ND, BU
No error
Specified port is currently in use by another protocol
Timeout trigger event location is not valid
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Description
1
Background read;
written to 0 on
initialization
0
1
Read on module reset,
protocol interface reset
or protocol enable
0
2
Write on module reset,
Modbus interface reset
or Modbus interface
enable
0
MCi210 User Guide
Issue Number: 2