Intended Use; Use And Operation Solely With The Following Machines - EWM TAURUS 355 Basic TDM Operating Instruction

Intended use

3
Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and
standards applicable for use in industry and trade. It may only be used for the welding
procedures indicated at the rating plate. Hazards may arise for persons, animals and
material objects if the equipment is not used correctly. No liability is accepted for any
damages arising from improper usage!
•
The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
•
Do not improperly modify or convert the equipment!
Arc welding machine for gas-shielded metal-arc welding and MMA welding as secondary process. It may
be possible to expand the range of functions by using accessories (see the documentation in the relevant
chapter).
3.1

Use and operation solely with the following machines

A suitable wire feed unit (system component) is required in order to operate the welding
machine!
Wire feed unit
•
drive 4 Basic
•
drive 4 Basic MMA
•
drive 4 IC Basic
•
drive 4 IC Basic D200
•
Taurus Basic drive 4
•
Taurus Basic drive 4L
•
Taurus Basic drive 200C
•
Taurus Basic drive 300C
Transport vehicle
•
Trolly 55
Cooling unit
•
cool50-2 U40
099-005221-EW501
05.09.2016
Use and operation solely with the following machines
WARNING
Intended use
13