Intended Use; Use And Operation Solely With The Following Machines; Software Version; Documents Which Also Apply - EWM Tetrix DC Smart 2.0 T4.05 Operating Instructions Manual

3

Intended use

Hazards due to improper usage!
The machine has been constructed to the state of the art and any regulations and stand-
ards applicable for use in industry and trade. It may only be used for the welding proce-
dures indicated at the rating plate. Hazards may arise for persons, animals and material
objects if the equipment is not used correctly. No liability is accepted for any damages
arising from improper usage!
• The equipment must only be used in line with its designated purpose and by trained or
expert personnel!
• Do not improperly modify or convert the equipment!
3.1

Use and operation solely with the following machines

• Tetrix 300 Smart 2.0 (T4.05)
• Tetrix 351-551 Smart 2.0 (T4.11)
• Tetrix 200 Smart 2.0 (T4.13)
3.2

Software version

The software version of the machine control can be displayed in the machine configuration menu
(menu Srv) > see 5.6 chapter.
3.3

Documents which also apply

• Operating instructions for the connected welding machines
• Documents of the optional expansions
099-00T405-EW501
14.02.2022
Use and operation solely with the following machines
WARNING
Intended use
13