Sony SAL16105 Service Manual page 82

4-12. FINISHED INSPECTION (ActuatorChecker2)
Equipment
• Personal Computer
• Finished Inspection JIG (AC100 V only)
• Lens Adjustment Program (ActuatorChecker2.exe)
1. Preparations
1) Connected to equipment with checking lens. (Refer to Section 4-1-4.)
2) Start up of "ActuatorChecker2.exe".
[Set up]
3) Click , and perform the initial setting. (Refer to Section 4-1-5.)
2. Checking Method
[START]
1) Click .
2) The Serial window appears. Input the lens serial number.
[OK]
Note:
When
item.
Fig.4-12-2
3) The message "Move Zoom to Wide position. Then push [ENTER]." is displayed on the pop-up window.
Set the zoom to wide position and press down the ENTER key.
SAL16105 (DT 3.5-5.6/16-105) (DT 16-105mm F3.5-5.6)
Fig.4-12-1
is clicked without inputting the serial number, the date executed is displayed on the completion window of each
Fig.4-12-3
4-40